Function Instruction:
■ Supported PLCs
We support the following manufactures, Mitsubishi. Omron. Panasonic. Siemens. ModBus RTU. ModBus ASCII. ModBus TCP. LG. Delta. Fatek. Vigor and so on. As for new brands, we will supply relevant communication protocol for updating.( The brands referred above are reserved by the relevant manufactures)
■ Convenient operation and macro instructions
By operating macros can help PLC to deal with complicated computation, together with the communication macro, users can draft the communication protocol by themselves and then the element can communicate with certain system through COM port.
■ Quickly download program via USB
Download via USB Ver1.1/2.0 will shorten the download time
■ Supports two PLCs at the same time
It can support two communication ports at the same time, and can connect two different or multiple controllers with the same communication protocol at same time.
■ on-line simulation
After program, you can directly use the PC to connect the controller to simulate whether the human-machine action is correct.
■ Ethernet communication port (Only available for MT60 series HMI as optional)
10/100BASE-T, ethernet communicate port provide fast data exchange function. Any TP can organize network to perform aggregate remote control. Data can also be uploaded in a short time via Ethernet.
■ Backup data by U disk (U disk file system must be FAT 32) or SD card (only MT60 series HMI support)
The data uploading and downloading function can be realized through the U disk or the SD card; the HMI program compiled on the computer can also be downloaded to the touch screen through the U disk or the SD card, so that HMI is not connected to the PC,
and the program is downloaded using the HMI software. The historical data and alarm messages can be transferred to SD card. The user can use card reader to read the messages.
Installation Fastenin:
